Order in next 14 hours and 45 minutes for despatch today.
UK Post £4.95. Spend £30.00 more for free UK postage.
Order in next 14 hours and 45 minutes for despatch today.
UK Post £4.95. Spend £30.00 more for free UK postage.
STAFF HOLIDAY — Please note due to staff holidays orders placed between midday Thursday 31st Oct and Monday 4th Nov inc. will be shipped from Tuesday 5th Nov. 2024
Satin Chrome Combination Lock
UK Post £4.95. Spend £30.00 more for free UK postage.
Product Code: SSCL1
This replacement two dial combination lock suits many Briefcases/ Folios. It satin chrome and measures 40mm x 28mm.
The lock has a button on one side when pressed will release the lock and enable the flap of the briefcase to be lifted.
Please note this lock does not come with back plate or screws both need to be reclaimed from your existing lock.
Choose options: |
Any questions? Call Sara or Paul on 01494 775577 (if not from UK please call 0044 1494 775577) Mon-Fri 9.30 a.m. to 5.00p.m.
Other pictures
Satin Chrome Combination Lock
Satin Chrome Combination Lock
Satin Chrome Combination Lock
Fitting A Soft Briefcase Lock
| Remove the old hasp from the flap by un-screwing it or drilling out the screws. | |
| Step 2 | Put the new hasp on the Flap of the case and secure in place with the grub screws. |
| Step 3 | Cut the lining or un-stitch a seam to reveal the back of the old lock. |
| Step 4 | Prise up the metal prongs securing the old lock remove the back plate and then remove the lock. |
| Step 5 | To ensure correct positioning of the new lock engage it into the hasp on the flap and (whilst the lock is engaged) gently press the lock prongs into the main panel of the bag. |
| Step 6 | After the above method you should see 4/2 prong marks indicating where you need to cut the panel. Cut the panel gently with a craft knife ensuring the slot is not too long (its easy to apply too much pressure with a sharp knife). |
| Step 7 | Push the prongs through the slots and on the inside put the back plate over the prongs and fold them down. |
| Step 8 | Once you are happy the lock is in the correct position (having opened and close it a couple of times) stick/ stitch the lining back. (A patch can be cut and stuck with evo-stick or you could simply use a fabric tape.) |