Cookie Consent by Popupsmart Website

Home | Spare Parts | Replacement Briefcase Hasps

Matt Nickel Franzen Briefcase Hasp.

Home | Spare Parts | Replacement Briefcase Hasps

Matt Nickel Franzen Briefcase Hasp.

Home | Spare Parts | Replacement Briefcase Hasps

Matt Nickel Franzen Briefcase Hasp.

Home | Spare Parts | Replacement Briefcase Hasps

Matt Nickel Franzen Briefcase Hasp.






Matt Nickel Franzen Briefcase Hasp CPH1
Matt Nickel Franzen Briefcase Hasp CPH1
Matt Nickel Franzen Briefcase Hasp CPH1
Matt Nickel Franzen Briefcase Hasp CPH1

Matt Nickel Franzen Briefcase Hasp

UK Post £4.95. Spend £30.00 more for free UK postage.

Product Code: CPH2


Price: £9.60 (£8.00 ex VAT)

This small Franzen matt nickel briefcase hasp is an appropriate replacement catch for many briefcase combination/ key locks. Do however check dimensions and detail closely, as slight differences in design may mean certain spares won't work with your briefcase.

Dimensions:
Length (closed) 46mm
Width 32mm
Hole centres 22mm.

Suits either left or right hand locks.

This range of replacement parts is useful for practically minded people, who have a broken briefcase they do not want to part with and who do not have a saddler or luggage repairer in their neighbourhood.

Help: Fitting A Briefcase Hasp

Choose options:

Quantity:



Any questions? Call Sara or Paul on 01494 775577 (if not from UK please call 0044 1494 775577) Mon-Fri 9.30 a.m. to 5.00p.m.

 

Other pictures

Matt Nickel Franzen Briefcase Hasp


Matt Nickel Franzen Briefcase Hasp CPH1

Matt Nickel Franzen Briefcase Hasp CPH1

Matt Nickel Franzen Briefcase Hasp CPH1

Back to product

Fitting A Briefcase Hasp

Step 1 Peel back the organiser section in the lid by about 5 inches. Don't worry about the stitching as it is dummy stitched.
Step 2 Peel back the leather that covers the underside of the hasp you wish to replace. Once again don't worry about the stitching.
Step 3 You should by now have revealed the back of the rivets that hold the hasp onto the case. Two types of rivet are commonly used. The first type has two legs that can be straightened with a flat headed screwdriver and extracted. The second usually has a washer capping it on the inside which can be carefully drilled out with a cordless drill.
Step 4 Put the new hasp on, tapping down the new rivets with a hammer and reverse the process gluing the lining as you go (Evo-stick is best).

Back to product